updated readme

Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>

.gitignore

@@ -1,5 +1,9 @@
 # Per-user container name/settings — run `./claudaris config` to generate.
 /.env
 
+# Generated by `claudaris start` when $DATA_DIR/ssh exists, to opt the
+# compose service into the read-only SSH mount. Absent otherwise.
+/docker-compose.override.yml
+
 # Claude Code's auto-generated per-user permission cache.
 /.claude/settings.local.json

AGENTS.md

@@ -8,7 +8,17 @@ Docker scaffold for running Claude Code in an isolated container (see README.md)
   (image/container name — the default `claudaris` is meant to be overridden
   per person, e.g. `chris-claude`, so multiple users can each run their own
   container off this same repo), `DATA_DIR`, and `WORKSPACE_DIR`. `claudaris`
-  sources it if present.
+  sources it if present; `docker-compose.yml` reads the same vars, and
+  `docker compose` picks up `.env` on its own since it lives in the project
+  directory compose runs from — so `claudaris` and plain `docker compose`
+  commands agree without any extra wiring.
+- `docker-compose.yml` — the actual container definition (build context,
+  image/container/hostname name, volumes); `claudaris` shells out to
+  `docker compose` rather than raw `docker build`/`run`/`exec`. The one
+  mount it can't express is the opt-in SSH mount (see `claudaris start`
+  below), which needs a host path to exist first — that's added via a
+  gitignored `docker-compose.override.yml` that `claudaris start` writes or
+  removes as needed; compose merges it automatically when present.
 - `Dockerfile` — archlinux base image with bash, git, nodejs/npm, tmux, vim,
   fastfetch, etc. `files/bash_aliases` is baked in at `/opt/dotfiles/bash_aliases`
   and `files/bashrc` becomes the image's default `/root/.bashrc` — both are
@@ -20,6 +30,25 @@ Docker scaffold for running Claude Code in an isolated container (see README.md)
   individual host files onto `~/.claude/.credentials.json` (the OAuth token)
   and `~/.claude.json` (account/onboarding state) — see `claudaris start`
   below for why these are per-file mounts rather than a directory volume.
+  Three MCP servers for Claude Code are also installed at build time:
+  `n8n-mcp` (npm, `/usr/local/bin/n8n-mcp`), the official `gitea-mcp`
+  (latest release binary, `/usr/local/bin/gitea-mcp`), and
+  `invokeai-mcp-server` (PyPI via `uv tool install`; upstream hardcodes the
+  InvokeAI URL, so the Dockerfile sed-patches it to honor
+  `$INVOKEAI_BASE_URL`, with a `grep` that fails the build if upstream
+  changes and the patch stops landing). They're only *installed* by the
+  Dockerfile — *registration* happens in `files/entrypoint.sh` on every
+  container start (`claude mcp add --scope user`, skipped per-server if
+  already present), because user-scope MCP config lives in `~/.claude.json`,
+  which is bind-mounted from the host and would shadow anything registered
+  at build time. Consequence of the "add if missing" guard: hand edits to a
+  server's config survive restarts, but a server removed with
+  `claude mcp remove` is re-added on the next container start. The servers
+  read their instance URLs/tokens (`GITEA_HOST`, `GITEA_ACCESS_TOKEN`,
+  `N8N_API_URL`, `N8N_API_KEY`, `INVOKEAI_BASE_URL`) from the environment
+  Claude Code runs in — commented `export` templates live in
+  `files/bash_aliases`, which is host-persisted, so tokens stay out of the
+  image and the repo.
   `git config --system --add safe.directory '*'` is set so git works on
   `/projects` repos bind-mounted from the host (which the container, always
   running as root, would otherwise treat as untrusted). `files/entrypoint.sh`
@@ -38,33 +67,39 @@ Docker scaffold for running Claude Code in an isolated container (see README.md)
   - `config` (alias `configure`) — interactive wizard prompting for `NAME`,
     `DATA_DIR`, `WORKSPACE_DIR` (showing current/default values, enter to
     keep) and writing them to `.env`. Re-run any time to update it.
-  - `build` — builds the image, tagged `$NAME` (see `.env` above).
+  - `build` — `docker compose build --no-cache --pull` (see `.env` above for
-  - `start` — runs the container as `$NAME` with `--hostname "$NAME"` (so the
+    `$NAME`).
-    shell prompt reads `root@$NAME`, e.g. `root@claudaris`, instead of a
+  - `start` — `docker compose up -d`, so the shell prompt reads
-    random container ID). `/root/.bashrc`, `/opt/dotfiles/bash_aliases`, and
+    `root@$NAME`, e.g. `root@claudaris`, instead of a random container ID
-    the two auth files (`~/.claude/.credentials.json`, `~/.claude.json`) are
+    (`hostname:` in `docker-compose.yml`). `/root/.bashrc`,
-    each bind-mounted individually — seeded once (empty, for the auth files;
+    `/opt/dotfiles/bash_aliases`, and the auth files
-    from `files/bashrc`/`files/bash_aliases`, for the dotfiles) into
+    (`~/.claude/.credentials.json`, `~/.claude.json`,
-    `$DATA_DIR/home/{.bashrc,bash_aliases}` and
+    `~/.local/share/opencode/auth.json`) are each bind-mounted individually
-    `$DATA_DIR/claude/{credentials,claude}.json` on the host, so they can be
+    in `docker-compose.yml` — seeded once by `start` (empty, for the auth
-    edited/persist without a rebuild — including a coworker dropping in their
+    files; from `files/bashrc`/`files/bash_aliases`, for the dotfiles) into
-    own aliases. Individual-file mounts matter for the auth files
+    `$DATA_DIR/home/{.bashrc,bash_aliases}`,
-    specifically: Claude Code likely saves them atomically (write a temp
+    `$DATA_DIR/claude/{credentials,claude}.json`, and
-    file, then `rename()` over the target), and `rename()` onto a symlink
+    `$DATA_DIR/opencode/auth.json` on the host, so they can be edited/persist
-    replaces the symlink instead of writing through it — silently breaking
+    without a rebuild — including a coworker dropping in their own aliases.
-    persistence after the first write. A bind mount doesn't have that
+    Individual-file mounts matter for the auth files specifically: Claude
-    failure mode, which is why these aren't just symlinked from a directory
+    Code and OpenCode likely save them atomically (write a temp file, then
-    volume the way an earlier version of this setup did it. `$WORKSPACE_DIR`
+    `rename()` over the target), and `rename()` onto a symlink replaces the
-    is mounted at `/projects`. Also offers an opt-in `/root/.ssh` mount
+    symlink instead of writing through it — silently breaking persistence
-    (read-only) for reaching other nodes: create `$DATA_DIR/ssh` on the host
+    after the first write. A bind mount doesn't have that failure mode,
-    and populate it before starting the container to enable it. `DATA_DIR`
+    which is why these aren't just symlinked from a directory volume the way
-    defaults to `/data/$NAME`; `WORKSPACE_DIR` defaults to
+    an earlier version of this setup did it. `$WORKSPACE_DIR` is mounted at
-    `/home/$USER/projects` (override via `claudaris config`).
+    `/projects`. Also offers an opt-in `/root/.ssh` mount (read-only) for
-  - `connect` — `docker start`s `$NAME` (a no-op if it's already running)
+    reaching other nodes: create `$DATA_DIR/ssh` on the host and populate it
-    then attaches to its tmux session, so it also works right after the
+    before starting the container to enable it — `start` writes or removes a
+    gitignored `docker-compose.override.yml` for this mount, since compose
+    can't make a volume conditional on a host path existing the way the
+    script itself can. `DATA_DIR` defaults to `/data/$NAME`; `WORKSPACE_DIR`
+    defaults to `/home/$USER/projects` (override via `claudaris config`).
+  - `connect` — `docker compose up -d` (a no-op if already running) then
+    `docker compose exec claudaris bash`, so it also works right after the
     container has auto-exited (see `Dockerfile`/entrypoint above).
-  - `remove` (aliases `stop`, `rm`) — stops and removes the container so
+  - `remove` (aliases `stop`, `rm`) — `docker compose down`, so a subsequent
-    a subsequent `start` recreates it fresh.
+    `start` recreates the container fresh.
   - `help` — usage.
 - `files/` — plain (non-dot) source files `COPY`'d into the image at build
   time: `bashrc`/`bash_aliases` (dotfiles — see `Dockerfile` above),
@@ -74,26 +109,28 @@ Docker scaffold for running Claude Code in an isolated container (see README.md)
   `bash_aliases` are also seeded onto the host by `claudaris start` so their
   bind-mounted copies can diverge without a rebuild.
 - `README.md` — usage instructions.
+- `docs/` — user documentation in markdown: `README.md` (index),
+  `getting-started.md` (setup and daily use), `claudaris.md` (the executable,
+  subcommand by subcommand, including the mount table), `mcp.md` (the baked-in
+  MCP servers and their env vars). Keep these in sync when changing the
+  script, Dockerfile, or entrypoint.
 
 ## Common commands
 ```bash
 # build the image
-docker build -t "$NAME" .
+docker compose build --no-cache --pull
 
 # start the container
-docker run -d \
+docker compose up -d
-  --name "$NAME" \
-  --hostname "$NAME" \
-  -v "$DATA_DIR/home/.bashrc:/root/.bashrc" \
-  -v "$DATA_DIR/home/bash_aliases:/opt/dotfiles/bash_aliases" \
-  -v "$DATA_DIR/claude/credentials.json:/root/.claude/.credentials.json" \
-  -v "$DATA_DIR/claude/claude.json:/root/.claude.json" \
-  -v "$WORKSPACE_DIR:/projects" \
-  "$NAME"
 
-# attach to the running container's tmux session
+# attach to the running container
-docker exec -it "$NAME" tmux
+docker compose exec claudaris bash
 ```
+`docker compose` reads `NAME`/`DATA_DIR`/`WORKSPACE_DIR` from `.env`
+automatically (no `claudaris` involvement needed), but the host-side seeding
+`claudaris start` does (dotfiles, auth files, the SSH override) isn't
+replicated by compose itself — run `claudaris start` at least once per host
+before using raw compose commands.
 
 ## Notes
 No test suite or CI — this is infra/config, not application code. Verify changes

Dockerfile

@@ -15,8 +15,10 @@ RUN pacman -Sy --noconfirm archlinux-keyring && \
         mariadb-clients \
         nodejs \
         npm \
+        opencode \
         openssh \
         php \
+        php-sqlite \
         pwgen \
         python \
         redis \
@@ -56,6 +58,31 @@ RUN curl -fsSL https://claude.ai/install.sh | bash
 RUN PATH="/root/.local/bin:$PATH" bash -c \
     'curl -fsSL https://raw.githubusercontent.com/leeguooooo/claude-code-usage-bar/main/web-install.sh | bash'
 
+# MCP servers for Claude Code. Only installed here — they're registered at
+# user scope by entrypoint.sh on container start, because user-scope MCP
+# config lives in ~/.claude.json, which is bind-mounted from the host and
+# would shadow anything written to it at build time. Each server picks up
+# its instance URL/token from the environment (see files/bash_aliases).
+
+# n8n — https://github.com/czlonkowski/n8n-mcp
+RUN npm install -g --prefix /usr/local n8n-mcp
+
+# Gitea — official server, latest release binary
+# https://gitea.com/gitea/gitea-mcp
+RUN tag="$(curl -fsSL https://gitea.com/api/v1/repos/gitea/gitea-mcp/releases/latest \
+        | python -c 'import json,sys; print(json.load(sys.stdin)["tag_name"])')" && \
+    curl -fsSL "https://gitea.com/gitea/gitea-mcp/releases/download/${tag}/gitea-mcp_Linux_x86_64.tar.gz" \
+        | tar -xz -C /usr/local/bin gitea-mcp && \
+    chmod 755 /usr/local/bin/gitea-mcp
+
+# InvokeAI — https://github.com/coinstax/invokeai-mcp-server. Upstream
+# hardcodes the InvokeAI URL, so patch it to honor $INVOKEAI_BASE_URL; the
+# grep fails the build if upstream changes shape and the patch stops landing.
+RUN uv tool install invokeai-mcp-server && \
+    python -c 'import glob; path=glob.glob("/root/.local/share/uv/tools/invokeai-mcp-server/lib/python*/site-packages/invokeai_mcp_server.py")[0]; c=open(path).read(); c="import os\n"+c; c=c.replace("INVOKEAI_BASE_URL = \"http://127.0.0.1:9090\"", "INVOKEAI_BASE_URL = os.environ.get(\"INVOKEAI_BASE_URL\", \"http://127.0.0.1:9090\")"); open(path,"w").write(c)' && \
+    grep -q 'INVOKEAI_BASE_URL = os.environ.get' \
+        /root/.local/share/uv/tools/invokeai-mcp-server/lib/python*/site-packages/invokeai_mcp_server.py
+
 # tmux wrapper
 COPY files/tmux /usr/local/bin/tmux
 COPY files/tmux.conf /etc/tmux.conf

README.md

@@ -1,6 +1,14 @@
 # claudaris
 
-Claudaris (klaw-DAR-iss): A moveable docker container for Claude code. using Arch btw.
+Claudaris (klaw-DAR-iss): A moveable docker container for Claude and OpenCode. using Arch btw.
+
+`./claudaris` is a thin wrapper around `docker compose` (see
+`docker-compose.yml`) — `build`/`start`/`connect`/`remove` still work exactly
+as below, and `docker compose` commands work directly too if you'd rather use
+those.
+
+Full documentation lives in [`docs/`](docs/README.md): [getting started](docs/getting-started.md),
+the [`claudaris` executable](docs/claudaris.md), and [MCP servers](docs/mcp.md).
 
 ## Configure
 
@@ -22,24 +30,34 @@ defaults to `/data/$NAME`; `WORKSPACE_DIR` (the host dir mounted as
 As root run build (always `--no-cache --pull`, so it picks up the latest Claude Code release):
 ```
 sudo ./claudaris build
+# or
+docker buildx build --no-cache -t 4lights/claudaris:latest .
 ```
 ## Start the container
 
 Make sure the volumes are as you like and start the container.
 ```
 sudo ./claudaris start
+or 
+docker compose up -d
 ```
 
 ## Connect to the container
 
 ```
 sudo ./claudaris connect
+# or
+docker compose exec claudaris bash
+# or 
+docker compose exec claudaris tmux
 ```
 
 ## Stop and remove the container
 
 ```
 sudo ./claudaris remove
+# or
+docker compose down
 ```
 (aliases: `stop`, `rm`)
 
@@ -49,6 +67,21 @@ To let the container SSH out to other machines, create `$DATA_DIR/ssh`
 on the host and populate it with keys/config *before* running `./claudaris start`. If
 present, it's bind-mounted read-only to `/root/.ssh`. It's off by default.
 
+## MCP servers
+
+MCP servers for [Gitea](https://gitea.com/gitea/gitea-mcp),
+[n8n](https://github.com/czlonkowski/n8n-mcp), and
+[InvokeAI](https://github.com/coinstax/invokeai-mcp-server) are baked into
+the image and registered with Claude Code (user scope) automatically on
+container start. To point them at your instances, uncomment and fill in the
+`export` lines at the bottom of your host-persisted
+`$DATA_DIR/home/bash_aliases` (`GITEA_HOST`, `GITEA_ACCESS_TOKEN`,
+`N8N_API_URL`, `N8N_API_KEY`, `INVOKEAI_BASE_URL`) — if yours was seeded
+before this feature existed, copy the block from `files/bash_aliases`.
+Tokens stay on the host, out of the image and repo. Note the services run
+elsewhere (not in this container), so use URLs reachable from inside it —
+`127.0.0.1` here means the container itself.
+
 ## Notes
 
 Claude Code is installed at build time under `/root`, so a rebuild always

claudaris

@@ -8,8 +8,17 @@ REPO_DIR="$(pwd)"
 # people can each run their own container from this repo) and other options.
 # It writes them to .env, which is gitignored and sourced here if present.
 NAME=claudaris
+CLAUDARIS_IMAGE=4lights/claudaris:latest
 [ -f .env ] && set -a && . .env && set +a
 
+# docker-compose.yml reads NAME/DATA_DIR/WORKSPACE_DIR for variable
+# substitution, so every subcommand that shells out to `docker compose`
+# needs them exported, with the same defaults `cmd_start` seeds on disk.
+export NAME
+export CLAUDARIS_IMAGE
+export DATA_DIR="${DATA_DIR:-/data/$NAME}"
+export WORKSPACE_DIR="${WORKSPACE_DIR:-/home/${USER:-$(id -un)}/projects}"
+
 usage() {
   cat <<EOF
 Usage: ./claudaris <command>
@@ -18,7 +27,7 @@ Commands:
   config, configure  Interactive wizard to write .env with your settings
   build              Build the container image (always --no-cache --pull)
   start              Start (or create) the container
-  connect            Start the container if needed, then attach a tmux session
+  connect            Start the container if needed, then attach a bash shell
   remove, stop, rm   Stop and remove the container
   help               Show this message
 EOF
@@ -39,9 +48,14 @@ cmd_config() {
   read -r -p "WORKSPACE_DIR [$workspace_dir_default]: " input
   WORKSPACE_DIR="${input:-$workspace_dir_default}"
 
+  local claudaris_image_default="${CLAUDARIS_IMAGE:-4lights/claudaris:latest}"
+  read -r -p "CLAUDARIS_IMAGE [$claudaris_image_default]: " input
+  CLAUDARIS_IMAGE="${input:-$claudaris_image_default}"
+
   cat > .env <<EOF
 # Written by \`./claudaris config\` — gitignored, per-user.
 NAME=$NAME
+CLAUDARIS_IMAGE=$CLAUDARIS_IMAGE
 DATA_DIR=$DATA_DIR
 WORKSPACE_DIR=$WORKSPACE_DIR
 EOF
@@ -53,17 +67,10 @@ EOF
 
 cmd_build() {
   export BUILDX_NO_DEFAULT_ATTESTATIONS=1
-  docker build --no-cache --pull -t "$NAME" .
+  docker compose build --no-cache --pull
 }
 
 cmd_start() {
-  # Host directory for volume mount data, separate from the repo checkout.
-  DATA_DIR="${DATA_DIR:-/data/$NAME}"
-
-  # Host directory mounted as /projects (the project workspace) inside the
-  # container. Override via `./claudaris config` if it's not right for you.
-  WORKSPACE_DIR="${WORKSPACE_DIR:-/home/${USER:-$(id -un)}/projects}"
-
   # Seed host copies of .bashrc and bash_aliases, without clobbering any
   # customization already made on this host. Both are bind-mounted as
   # single files below so they can be tweaked per-host (e.g. a coworker
@@ -87,41 +94,47 @@ cmd_start() {
   [ -f "$DATA_DIR/claude/credentials.json" ] || touch "$DATA_DIR/claude/credentials.json"
   [ -f "$DATA_DIR/claude/claude.json" ] || touch "$DATA_DIR/claude/claude.json"
 
+  # OpenCode stores provider credentials (API keys/OAuth tokens) in a single
+  # auth.json, same atomic-write concern as Claude Code above, so it gets the
+  # same individual-file bind mount treatment.
+  mkdir -p "$DATA_DIR/opencode"
+  [ -f "$DATA_DIR/opencode/auth.json" ] || touch "$DATA_DIR/opencode/auth.json"
+
   # Optional: mount ~/.ssh into the container (read-only) for connecting out to
   # other nodes. Opt in by creating $DATA_DIR/ssh and populating it with
-  # keys/config before starting the container.
+  # keys/config before starting the container. docker-compose.yml doesn't
-  ssh_mount=()
+  # list this mount (compose can't make a volume conditional on a host path
+  # existing), so it's added via a gitignored override file that compose
+  # picks up automatically when present, and removed when the opt-in host
+  # dir isn't there.
   if [ -d "$DATA_DIR/ssh" ]; then
-    ssh_mount=(-v "$DATA_DIR/ssh:/root/.ssh:ro")
+    cat > "$REPO_DIR/docker-compose.override.yml" <<EOF
+services:
+  claudaris:
+    volumes:
+      - $DATA_DIR/ssh:/root/.ssh:ro
+EOF
+  else
+    rm -f "$REPO_DIR/docker-compose.override.yml"
   fi
 
-  if docker ps -aq -f name="^${NAME}\$" | grep -q .; then
+  docker compose up -d
-    docker start "$NAME"
-  else
-    docker run -d \
-      --name "$NAME" \
-      --hostname "$NAME" \
-      -v "$DATA_DIR/home/.bashrc:/root/.bashrc" \
-      -v "$DATA_DIR/home/bash_aliases:/opt/dotfiles/bash_aliases" \
-      -v "$DATA_DIR/claude/credentials.json:/root/.claude/.credentials.json" \
-      -v "$DATA_DIR/claude/claude.json:/root/.claude.json" \
-      -v "$WORKSPACE_DIR:/projects" \
-      "${ssh_mount[@]}" \
-      "$NAME"
-  fi
 }
 
 cmd_connect() {
   # The container exits on its own once the main tmux session ends (see
   # entrypoint.sh) and isn't auto-restarted, so make sure it's up before
-  # exec'ing in — a no-op if it's already running.
+  # exec'ing in — a no-op if it's already running. Plain bash rather than
-  docker start "$NAME" >/dev/null
+  # tmux here: when this container runs on a remote host, the caller is
-  docker exec -it "$NAME" tmux
+  # typically already inside a tmux session locally, and nesting tmux in
+  # tmux is annoying. tmux itself stays installed and available — run
+  # `tmux` manually inside the container if you want it.
+  docker compose up -d >/dev/null
+  docker compose exec claudaris bash
 }
 
 cmd_remove() {
-  docker stop "$NAME" >/dev/null 2>&1 || true
+  docker compose down
-  docker rm "$NAME"
 }
 
 case "${1:-help}" in

docker-compose.yml

@@ -0,0 +1,14 @@
+services:
+  claudaris:
+    image: ${CLAUDARIS_IMAGE:-4lights/claudaris:latest}
+    container_name: ${NAME:-claudaris}
+    hostname: ${NAME:-claudaris}
+    stdin_open: true
+    tty: true
+    volumes:
+      - ${DATA_DIR:-/data/claudaris}/home/.bashrc:/root/.bashrc
+      - ${DATA_DIR:-/data/claudaris}/home/bash_aliases:/opt/dotfiles/bash_aliases
+      - ${DATA_DIR:-/data/claudaris}/claude/credentials.json:/root/.claude/.credentials.json
+      - ${DATA_DIR:-/data/claudaris}/claude/claude.json:/root/.claude.json
+      - ${DATA_DIR:-/data/claudaris}/opencode/auth.json:/root/.local/share/opencode/auth.json
+      - ${WORKSPACE_DIR:-./}:/projects

docs/README.md

@@ -0,0 +1,14 @@
+# claudaris docs
+
+Claudaris (klaw-DAR-iss) is a movable Docker container for running
+[Claude Code](https://code.claude.com/docs) in isolation, built on Arch Linux.
+Your login, dotfiles, and MCP configuration live on the host, so the image can
+be rebuilt at any time (always pulling the latest Claude Code release) without
+losing anything.
+
+- **[Getting started](getting-started.md)** — prerequisites, first-time setup,
+  and daily use.
+- **[The `claudaris` executable](claudaris.md)** — every subcommand, what it
+  does, and the files and mounts behind it.
+- **[MCP servers](mcp.md)** — the Gitea, n8n, and InvokeAI MCP servers baked
+  into the image, and how to point them at your instances.

docs/claudaris.md

@@ -0,0 +1,110 @@
+# The `claudaris` executable
+
+`./claudaris` is a single bash script at the repo root that wraps
+`docker compose` (see `docker-compose.yml`). It `cd`s to its own directory
+first, so it can be invoked from anywhere. Run it with no arguments (or
+`help`) for usage. Plain `docker compose` subcommands work directly too, as
+long as `.env` is present (compose reads it automatically) — `claudaris`
+just adds the `config` wizard and the host-side seeding/mount logic below.
+
+```
+Usage: ./claudaris <command>
+
+Commands:
+  config, configure  Interactive wizard to write .env with your settings
+  build              Build the container image (always --no-cache --pull)
+  start              Start (or create) the container
+  connect            Start the container if needed, then attach a tmux session
+  remove, stop, rm   Stop and remove the container
+  help               Show this message
+```
+
+All commands source `.env` if present (gitignored, written by `config`),
+falling back to `NAME=claudaris` and the defaults listed below.
+
+## `config` (alias: `configure`)
+
+Interactive wizard: prompts for `NAME`, `DATA_DIR`, and `WORKSPACE_DIR`,
+showing the current/default value for each (enter keeps it), then writes all
+three to `.env`. Safe to re-run any time. See
+[Getting started](getting-started.md#1-configure) for what each variable
+means.
+
+## `build`
+
+```bash
+sudo ./claudaris build
+```
+
+Runs `docker compose build --no-cache --pull`. Always uncached so a
+rebuild picks up the latest Arch packages, the latest Claude Code release
+(installed straight into `/root` in the image), and the latest
+[MCP server](mcp.md) releases.
+
+## `start`
+
+Runs `docker compose up -d`, which creates the container if it doesn't exist
+and (re)starts it otherwise, per `docker-compose.yml`. Container/image name,
+volumes, and workspace mount come from `NAME`/`DATA_DIR`/`WORKSPACE_DIR`,
+which compose reads from `.env` the same way `claudaris` does — mount
+changes in `docker-compose.yml` take effect on the next `up -d` without
+needing `remove` first.
+
+Before calling compose, `start` seeds the host side, without overwriting
+anything that already exists:
+
+- `$DATA_DIR/home/.bashrc` and `$DATA_DIR/home/bash_aliases` — copied from
+  `files/bashrc` and `files/bash_aliases`.
+- `$DATA_DIR/claude/credentials.json`, `$DATA_DIR/claude/claude.json`, and
+  `$DATA_DIR/opencode/auth.json` — created empty. Seeding them as files
+  matters: if Docker had to create the mount targets itself it would make
+  directories, breaking the login mounts.
+- `docker-compose.override.yml` (gitignored) — written to add the SSH mount
+  below if `$DATA_DIR/ssh` exists, removed otherwise. Compose merges this
+  file automatically when present; it's the only mount that can't live in
+  `docker-compose.yml` directly, since compose has no way to make a volume
+  conditional on a host path existing.
+
+The mounts, all declared in `docker-compose.yml`:
+
+| Mount | Purpose |
+| --- | --- |
+| `hostname: ${NAME}` | Prompt reads `root@$NAME` instead of a random container ID. |
+| `$DATA_DIR/home/.bashrc` → `/root/.bashrc` | Per-host shell config, editable without a rebuild. |
+| `$DATA_DIR/home/bash_aliases` → `/opt/dotfiles/bash_aliases` | Per-host aliases and [MCP env vars](mcp.md); sourced by `.bashrc`. |
+| `$DATA_DIR/claude/credentials.json` → `/root/.claude/.credentials.json` | Claude Code OAuth token. |
+| `$DATA_DIR/claude/claude.json` → `/root/.claude.json` | Claude Code account/onboarding state and user-scope MCP config. |
+| `$DATA_DIR/opencode/auth.json` → `/root/.local/share/opencode/auth.json` | OpenCode provider credentials (API keys/OAuth tokens). |
+| `$WORKSPACE_DIR` → `/projects` | Your project workspace. |
+| `$DATA_DIR/ssh` → `/root/.ssh` (read-only, override file, only if the host dir exists) | Opt-in SSH access to other machines. |
+
+The login files are individual file mounts rather than a directory volume on
+purpose: both Claude Code and OpenCode likely save them atomically (write a
+temp file, then `rename()` over the target), and `rename()` onto a symlink
+replaces the symlink instead of writing through it — which would silently
+break persistence. A bind mount doesn't have that failure mode.
+
+## `connect`
+
+```bash
+sudo ./claudaris connect
+```
+
+Runs `docker compose up -d` (a no-op if already running) and then
+`docker compose exec claudaris bash`.
+
+The explicit `up -d` matters because the container stops itself: the
+entrypoint creates the `main` tmux session and exits once that session ends
+(tmux defaults — a window closes when its shell exits, the session closes
+with its last window). There's no `--restart` policy, so after a Ctrl+D the
+container sits stopped until `connect` (or `start`) brings it back. `tmux`
+itself stays installed and available — run it manually inside the container
+(the in-container `tmux` wrapper attaches to the `main` session if it exists
+and creates it otherwise) if you want it.
+
+## `remove` (aliases: `stop`, `rm`)
+
+Runs `docker compose down`, stopping and removing the container so the next
+`start` recreates it fresh — needed after a `build` to actually run the new
+image, or after changing mounts. Nothing under `$DATA_DIR` or
+`$WORKSPACE_DIR` is touched.

docs/getting-started.md

@@ -0,0 +1,89 @@
+# Getting started
+
+Claudaris runs Claude Code inside an Arch Linux container, with your project
+workspace bind-mounted in and your login persisted on the host. Everything is
+driven by the [`./claudaris` executable](claudaris.md) at the repo root.
+
+## Prerequisites
+
+- Docker installed and running on the host.
+- Root (or equivalent Docker) access — the examples below use `sudo`.
+- A Claude account to log in with on first run.
+
+## 1. Configure
+
+From the repo root, run the interactive wizard and answer its prompts
+(press enter to keep a default):
+
+```bash
+./claudaris config
+```
+
+It asks for three values and writes them to `.env` (gitignored — every user
+of a shared checkout keeps their own):
+
+| Variable        | Default                | Meaning                                                        |
+| --------------- | ---------------------- | -------------------------------------------------------------- |
+| `NAME`          | `claudaris`            | Image *and* container name. Pick something unique to you (e.g. `chris-claude`) if several people run containers from the same repo checkout. |
+| `DATA_DIR`      | `/data/$NAME`          | Host directory for everything that must survive rebuilds: dotfiles, Claude login, optional SSH keys. |
+| `WORKSPACE_DIR` | `/home/$USER/projects` | Host directory mounted as `/projects` inside the container — this is where Claude Code works. |
+
+Re-run `config` any time to change these.
+
+## 2. Build the image
+
+```bash
+sudo ./claudaris build
+```
+
+The build always runs with `--no-cache --pull`, so every rebuild picks up the
+latest Arch packages and the latest Claude Code release. Claude Code is
+installed into the image itself (not a volume) — rebuilding is how you
+upgrade it.
+
+## 3. Start and connect
+
+```bash
+sudo ./claudaris start
+sudo ./claudaris connect
+```
+
+`start` creates the container (seeding host-side copies of the dotfiles and
+login files on first run); `connect` attaches you to its tmux session. You
+land in a shell at `/projects` as `root@$NAME`.
+
+On first connect, run `claude` and log in. The two files that carry the login
+(`~/.claude/.credentials.json` and `~/.claude.json`) are bind-mounted from
+`$DATA_DIR/claude/` on the host, so you stay logged in across container
+rebuilds and re-creations.
+
+## 4. Daily use
+
+- **Attach:** `sudo ./claudaris connect` — also restarts the container if it
+  stopped. The container exits on its own when the tmux session ends (last
+  shell exits via Ctrl+D, `exit`, or a crash); there is no Docker restart
+  policy, so `connect` bringing it back up is the normal flow.
+- **Detach without stopping anything:** standard tmux detach
+  (`Ctrl+b d`).
+- **Upgrade Claude Code / packages:** `sudo ./claudaris remove`, then
+  `sudo ./claudaris build` and `sudo ./claudaris start`. Login, dotfiles, and
+  MCP registration all survive this.
+
+## Customizing your shell
+
+`~/.bashrc` and the aliases file are bind-mounted single files living at
+`$DATA_DIR/home/.bashrc` and `$DATA_DIR/home/bash_aliases` on the host. Edit
+them there (or inside the container) and the changes persist across rebuilds —
+no image change needed. They're seeded from `files/bashrc` and
+`files/bash_aliases` the first time `start` runs and never overwritten after
+that.
+
+This is also where you configure the [MCP servers](mcp.md): the bottom of
+`bash_aliases` has commented `export` lines for the Gitea/n8n/InvokeAI URLs
+and tokens.
+
+## Optional: SSH access to other machines
+
+To let the container SSH out, create `$DATA_DIR/ssh` on the host and populate
+it with keys/config *before* running `start`. If the directory exists, it's
+bind-mounted read-only at `/root/.ssh`. It's off by default.

docs/mcp.md

@@ -0,0 +1,81 @@
+# MCP servers
+
+The image ships three [MCP](https://modelcontextprotocol.io/) servers for
+Claude Code, all speaking stdio:
+
+| Server | Name in `/mcp` | What it gives Claude | Source |
+| --- | --- | --- | --- |
+| Gitea | `gitea` | Repos, issues, PRs, releases on your Gitea instance | [gitea/gitea-mcp](https://gitea.com/gitea/gitea-mcp) (official, latest release binary) |
+| n8n | `n8n` | n8n node documentation, plus workflow creation/management when the API env vars are set | [czlonkowski/n8n-mcp](https://github.com/czlonkowski/n8n-mcp) (npm) |
+| InvokeAI | `invokeai` | Text-to-image, img2img, and upscaling against your InvokeAI instance | [coinstax/invokeai-mcp-server](https://github.com/coinstax/invokeai-mcp-server) (PyPI) |
+
+## How install and registration are split
+
+The Dockerfile only *installs* the servers (`/usr/local/bin/n8n-mcp`,
+`/usr/local/bin/gitea-mcp`, and a `uv` tool venv for InvokeAI).
+*Registration* happens in `files/entrypoint.sh` on every container start,
+via `claude mcp add --scope user`.
+
+It has to work that way: user-scope MCP config lives in `~/.claude.json`,
+which [`claudaris start`](claudaris.md#start) bind-mounts from the host — so
+anything registered at build time would be shadowed by the mounted file. The
+runtime registration writes into the mounted file instead, which also means
+it persists across rebuilds like the login does.
+
+Registration is guarded per server: a server that's already present is left
+alone, so hand edits to its config survive restarts. The flip side is that a
+server deleted with `claude mcp remove` comes back on the next container
+start — to change one permanently, edit its entry rather than removing it.
+
+## Pointing the servers at your instances
+
+The servers read their URLs and tokens from the environment Claude Code runs
+in (Claude Code passes its environment through to stdio MCP servers). Set
+them in your host-persisted aliases file, `$DATA_DIR/home/bash_aliases`,
+where a commented template already exists at the bottom:
+
+```bash
+export GITEA_HOST='https://gitea.example.com'
+export GITEA_ACCESS_TOKEN='...'
+export N8N_API_URL='https://n8n.example.com'   # optional: enables workflow management tools
+export N8N_API_KEY='...'
+export INVOKEAI_BASE_URL='http://invokeai.example.com:9090'
+```
+
+Then start a new shell (or `source ~/.bashrc`) and launch `claude`. Because
+the file lives on the host, tokens never end up in the image or the repo. If
+your `bash_aliases` was seeded before the MCP servers existed, copy the
+template block from `files/bash_aliases`.
+
+Notes:
+
+- **URLs must be reachable from inside the container.** `127.0.0.1` means
+  the container itself, not the host. Use the host's LAN address or service
+  hostname.
+- **Gitea:** create the token in Gitea under *Settings → Applications →
+  Generate New Token*.
+- **n8n:** without `N8N_API_URL`/`N8N_API_KEY` the server still works as a
+  node-documentation reference; the API pair unlocks creating and managing
+  workflows. Create the key in n8n under *Settings → n8n API*.
+- **InvokeAI:** defaults to `http://127.0.0.1:9090` if unset. Upstream
+  hardcodes that URL; the Dockerfile patches the package so
+  `INVOKEAI_BASE_URL` is honored (and the build fails loudly if a future
+  upstream release breaks the patch). Registration uses
+  `python -m invokeai_mcp_server` because the package's console script is
+  broken upstream.
+
+## Checking it works
+
+Inside the container:
+
+```bash
+claude mcp list      # all three should show as configured
+```
+
+Or in a Claude Code session, run `/mcp` to see connection status, and try
+something like *"list my Gitea repos"*. Note that a server whose env vars
+are unset still connects — the servers only read them when a tool is
+actually called — so a green `/mcp` status doesn't prove the configuration
+is right. Tool calls failing (or Gitea answering about gitea.com instead of
+your instance, its built-in default) is the symptom of missing/wrong env
+vars.

files/bash_aliases

@@ -4,7 +4,6 @@
 # ls long hidden and human readable
 alias ll='ls -lah'
 alias l1='ls -1'
-alias ls='ls --color=auto'
 
 # up levels (up #_of_dir_up)
 function cd_up() {
@@ -23,4 +22,13 @@ alias tl='tmux list-sessions'
 alias gs='git status'
 
 alias btw='fastfetch'
-alias cd='z'
+alias cd='z'
+
+# MCP servers (see Dockerfile / entrypoint.sh). Uncomment and point at your
+# instances — Claude Code passes its environment through to the stdio
+# servers, so exporting these here is all the configuration they need.
+#export GITEA_HOST='https://gitea.example.com'
+#export GITEA_ACCESS_TOKEN='changeme'
+#export N8N_API_URL='https://n8n.example.com'   # optional: enables workflow management tools
+#export N8N_API_KEY='changeme'
+#export INVOKEAI_BASE_URL='http://127.0.0.1:9090'

files/entrypoint.sh

@@ -5,6 +5,26 @@ set -euo pipefail
 # which bind-mounts ~/.claude/.credentials.json and ~/.claude.json individually
 # from the host (see claudaris) — nothing to seed or symlink here.
 
+# Register the MCP servers baked into the image (see Dockerfile) at user
+# scope. Done here rather than at build time because user-scope MCP config
+# lives in ~/.claude.json, which is bind-mounted from the host. Each server
+# is only added if missing, so hand edits survive restarts — but a server
+# removed via `claude mcp remove` comes back on the next container start.
+[ -s /root/.claude.json ] || echo '{}' > /root/.claude.json
+register_mcp() {
+    local name="$1"; shift
+    /root/.local/bin/claude mcp get "$name" >/dev/null 2>&1 ||
+        /root/.local/bin/claude mcp add --scope user "$name" "$@" || true
+}
+register_mcp gitea -- /usr/local/bin/gitea-mcp -t stdio
+register_mcp n8n --env MCP_MODE=stdio --env LOG_LEVEL=error \
+    --env DISABLE_CONSOLE_OUTPUT=true -- /usr/local/bin/n8n-mcp
+# Not the `invokeai-mcp-server` console script — it's broken upstream
+# (calls the async main() without asyncio.run); `python -m` is the
+# invocation upstream documents.
+register_mcp invokeai -- \
+    /root/.local/share/uv/tools/invokeai-mcp-server/bin/python -m invokeai_mcp_server
+
 # Create the main tmux session if it does not exist.
 /usr/bin/tmux new-session -d -s main 2>/dev/null || true
 

index.html

@@ -387,10 +387,11 @@
     <h1 class="glitch-title" data-text="CLAUDARIS">CLAUDARIS</h1>
     <div class="subtitle">
       /klaw-<span class="accent">DAR</span>-iss/ — a moveable docker container for
-      <span class="accent2">Claude Code</span>. using Arch btw.
+      <span class="accent2">Claude Code</span> and <span class="accent2">OpenCode</span>. using Arch btw.
     </div>
     <div class="tags">
       <span class="tag">ARCHLINUX</span>
+      <span class="tag">DOCKER COMPOSE</span>
       <span class="tag">TMUX</span>
       <span class="tag">SELF-HOSTED</span>
       <span class="tag">NO-RESTART-POLICY</span>
@@ -414,11 +415,14 @@
     <pre><code>./claudaris config</code></pre>
     <p>
       It writes your answers to <code>.env</code> (gitignored — every user
-      keeps their own), which every other command sources. Set
+      keeps their own). <code>claudaris</code> sources it, and
-      <code>NAME</code> to something unique to you (e.g. <code>claude-ten</code>)
+      <code>docker compose</code> reads the same file automatically since it
-      if more than one person is running a container from this same repo
+      lives in the project directory compose runs from — so
-      checkout. Re-run <code>config</code> / <code>configure</code> any time
+      <code>claudaris</code> and plain <code>docker compose</code> commands
-      to update it.
+      always agree. Set <code>NAME</code> to something unique to you (e.g.
+      <code>claude-ten</code>) if more than one person is running a container
+      from this same repo checkout. Re-run <code>config</code> /
+      <code>configure</code> any time to update it.
     </p>
     <table>
       <tr><th>variable</th><th>purpose</th><th>default</th></tr>
@@ -429,7 +433,7 @@
       </tr>
       <tr>
         <td class="name">DATA_DIR</td>
-        <td>Host directory for volume mount data — bashrc, aliases, Claude auth, ssh keys.</td>
+        <td>Host directory for volume mount data — bashrc, aliases, Claude Code / OpenCode auth, ssh keys.</td>
         <td class="default">/data/$NAME</td>
       </tr>
       <tr>
@@ -442,7 +446,14 @@
 
   <section id="commands">
     <h2>Commands</h2>
-    <p class="dim">Everything runs through the single <code>claudaris</code> entry point.</p>
+    <p class="dim">
+      <code>claudaris</code> is a thin wrapper around
+      <code>docker compose</code> (see <code>docker-compose.yml</code>) — it
+      adds the config wizard and host-side seeding, then shells out to
+      compose for the actual container lifecycle. Plain <code>docker
+      compose</code> commands work directly too, once <code>start</code> has
+      seeded the host once.
+    </p>
 
     <div class="cmd-grid">
       <div class="cmd-card">
@@ -452,22 +463,22 @@
       </div>
       <div class="cmd-card">
         <div><span class="cmd">build</span></div>
-        <div class="desc">Builds the image (always <code>--no-cache --pull</code>, so it picks up the latest Claude Code release).</div>
+        <div class="desc"><code>docker compose build --no-cache --pull</code> — always uncached, so it picks up the latest Claude Code / OpenCode releases.</div>
         <pre><code>sudo ./claudaris build</code></pre>
       </div>
       <div class="cmd-card">
         <div><span class="cmd">start</span></div>
-        <div class="desc">Creates or restarts the container with all volumes wired up.</div>
+        <div class="desc">Seeds host files, then <code>docker compose up -d</code> with all volumes wired up.</div>
         <pre><code>sudo ./claudaris start</code></pre>
       </div>
       <div class="cmd-card">
         <div><span class="cmd">connect</span></div>
-        <div class="desc">Starts the container if needed, then attaches your tmux session.</div>
+        <div class="desc">Starts the container if needed, then <code>docker compose exec</code>s a shell.</div>
         <pre><code>sudo ./claudaris connect</code></pre>
       </div>
       <div class="cmd-card">
         <div><span class="cmd">remove</span><span class="alias">stop · rm</span></div>
-        <div class="desc">Stops and removes the container so the next <code>start</code> recreates it fresh.</div>
+        <div class="desc"><code>docker compose down</code> — stops and removes the container so the next <code>start</code> recreates it fresh.</div>
         <pre><code>sudo ./claudaris remove</code></pre>
       </div>
     </div>
@@ -481,21 +492,28 @@
       <em>before</em> running <code>./claudaris start</code>. If present, it's
       bind-mounted read-only to <code>/root/.ssh</code>.
     </p>
-    <div class="note"><strong>off by default</strong> — nothing is mounted unless the directory exists.</div>
+    <div class="note"><strong>off by default</strong> — nothing is mounted unless the directory exists. Since compose can't make a volume conditional on a host path existing, <code>start</code> writes (or removes) a gitignored <code>docker-compose.override.yml</code> to add this mount, which compose merges automatically when present.</div>
   </section>
 
   <section id="internals">
     <h2>Internals</h2>
 
     <p><strong style="color:var(--green)">Persistent login.</strong>
-      Claude Code is installed at build time under <code>/root</code>, so a
+      Claude Code and OpenCode are both installed at build time (Claude Code
-      rebuild always picks up the latest release. Two files are bind-mounted
+      via installer straight into <code>/root</code>; OpenCode via
-      individually to survive that: <code>~/.claude/.credentials.json</code>
+      <code>pacman</code>), so a rebuild always picks up the latest release.
-      (the OAuth token) and <code>~/.claude.json</code> (account/onboarding
+      Three files are bind-mounted individually to survive that:
-      state — Claude Code checks this too, so persisting the token alone
+      <code>~/.claude/.credentials.json</code> (the OAuth token),
-      isn't enough to avoid a re-login prompt after a rebuild).
+      <code>~/.claude.json</code> (account/onboarding state — Claude Code
-      <code>./claudaris start</code> seeds both from empty on the host the
+      checks this too, so persisting the token alone isn't enough to avoid a
-      first time it runs.
+      re-login prompt after a rebuild), and
+      <code>~/.local/share/opencode/auth.json</code> (OpenCode's provider
+      credentials). <code>./claudaris start</code> seeds all three from empty
+      on the host the first time it runs. All three are individual-file
+      mounts rather than a directory volume, since both tools likely save
+      atomically (write a temp file, then <code>rename()</code> over the
+      target) — <code>rename()</code> onto a symlink replaces the symlink
+      instead of writing through it, silently breaking persistence.
     </p>
 
     <p><strong style="color:var(--green)">Self-stopping.</strong>
@@ -518,8 +536,8 @@
     </p>
 
     <p><strong style="color:var(--green)">Hostname.</strong>
-      The container is started with <code>--hostname "$NAME"</code>, so the
+      <code>docker-compose.yml</code> sets <code>hostname: ${NAME}</code>, so
-      prompt reads <code>root@claudaris</code> (or whatever you set
+      the prompt reads <code>root@claudaris</code> (or whatever you set
       <code>NAME</code> to) instead of a random container ID.
     </p>
   </section>
@@ -528,7 +546,9 @@
     <h2>Repo layout</h2>
     <ul class="check">
       <li><code>claudaris</code> — the entry point: build / start / connect / remove / help.</li>
-      <li><code>Dockerfile</code> — Arch base image, dotfiles, Claude Code install, entrypoint.</li>
+      <li><code>docker-compose.yml</code> — the container definition (image, volumes) that <code>claudaris</code> wraps.</li>
+      <li><code>docker-compose.override.yml</code> — gitignored, written by <code>start</code> for the opt-in SSH mount.</li>
+      <li><code>Dockerfile</code> — Arch base image, dotfiles, Claude Code / OpenCode install, entrypoint.</li>
       <li><code>.env</code> — written by <code>claudaris config</code>, per-user, gitignored.</li>
       <li><code>files/</code> — <code>bashrc</code>, <code>bash_aliases</code>, <code>entrypoint.sh</code>, <code>tmux</code> wrapper, <code>tmux.conf</code>.</li>
       <li><code>AGENTS.md</code> — deep-dive notes for anyone (human or agent) hacking on this repo.</li>
@@ -536,7 +556,7 @@
   </section>
 
   <footer>
-    claudaris <span class="blink">█</span> moveable · self-hosted · always running the latest Claude Code
+    claudaris <span class="blink">█</span> moveable · self-hosted · always running the latest Claude Code + OpenCode
   </footer>
 
 </div>